Skip to content

[dm][sdio] Update for SDHCI - #11684

Open
GuEe-GUI wants to merge 2 commits into
RT-Thread:masterfrom
GuEe-GUI:sdio
Open

[dm][sdio] Update for SDHCI#11684
GuEe-GUI wants to merge 2 commits into
RT-Thread:masterfrom
GuEe-GUI:sdio

Conversation

@GuEe-GUI

@GuEe-GUI GuEe-GUI commented Aug 4, 2026

Copy link
Copy Markdown
Contributor

拉取/合并请求描述：(PR description)

[
Add DesignWare MSHC platform support.
Improve the common SDHCI implementation for controllers used across different SoCs and virtual platforms.

The changes include:

  • fix reset and clock stabilization timeout calculations
  • improve interrupt completion and polling fallback handling
  • improve signal voltage switching and regulator voltage detection
  • support controllers without a controllable VQMMC supply
  • preserve 32-bit SDMA when 64-bit DMA is marked as broken
  • add an aligned bounce buffer for small and unaligned SDMA transfers
  • restore the original buffer before completing bounced requests
  • fix PIO block accounting and buffer advancement across interrupts
  • improve controller recovery after request errors
  • handle platform-specific timeout and response behavior

Keep the generic non-DM MMC and SD paths unchanged to reduce regression risk for existing MCU and SoC drivers.

Tested on SpacemiT K1, Raspberry Pi 4/5, Rockchip platforms, and QEMU PCI SDHCI.

]

当前拉取/合并请求的状态 Intent for your PR

必须选择一项 Choose one (Mandatory):

  • 本拉取/合并请求是一个草稿版本 This PR is for a code-review and is intended to get feedback
  • 本拉取/合并请求是一个成熟版本 This PR is mature, and ready to be integrated into the repo

代码质量 Code Quality：

我在这个拉取/合并请求中已经考虑了 As part of this pull request, I've considered the following:

  • 已经仔细查看过代码改动的对比 Already check the difference between PR and old code
  • 代码风格正确，包括缩进空格，命名及其他风格 Style guide is adhered to, including spacing, naming and other styles
  • 没有垃圾代码，代码尽量精简，不包含#if 0代码，不包含已经被注释了的代码 All redundant code is removed and cleaned up
  • 所有变更均有原因及合理的，并且不会影响到其他软件组件代码或BSP All modifications are justified and not affect other components or BSP
  • 对难懂代码均提供对应的注释 I've commented appropriately where code is tricky
  • 代码是高质量的 Code in this PR is of high quality
  • 已经使用clang-format 源码格式化工具确保格式符合RT-Thread代码规范 This PR has been formatted with clang-format and complies with RT-Thread code specification
  • 如果是新增bsp, 已经添加ci检查到.github/ALL_BSP_COMPILE.json 详细请参考链接BSP自查

GuEe-GUI added 2 commits August 4, 2026 20:54
@GuEe-GUI
drivers: sdio: improve SDHCI portability and DMA handling
90b7175 
Improve the common SDHCI implementation for controllers used across
different SoCs and virtual platforms.

The changes include:

- fix reset and clock stabilization timeout calculations
- improve interrupt completion and polling fallback handling
- improve signal voltage switching and regulator voltage detection
- support controllers without a controllable VQMMC supply
- preserve 32-bit SDMA when 64-bit DMA is marked as broken
- add an aligned bounce buffer for small and unaligned SDMA transfers
- restore the original buffer before completing bounced requests
- fix PIO block accounting and buffer advancement across interrupts
- improve controller recovery after request errors
- handle platform-specific timeout and response behavior

Keep the generic non-DM MMC and SD paths unchanged to reduce regression
risk for existing MCU and SoC drivers.

Tested on SpacemiT K1, Raspberry Pi 4/5, Rockchip platforms, and QEMU
PCI SDHCI.

Signed-off-by: GuEe-GUI <2991707448@qq.com>
@GuEe-GUI
drivers: sdio: add DesignWare MSHC platform support
ff795b3 
Signed-off-by: GuEe-GUI <2991707448@qq.com>
@github-actions

github-actions Bot commented Aug 4, 2026

Copy link
Copy Markdown

👋 感谢您对 RT-Thread 的贡献！Thank you for your contribution to RT-Thread!

为确保代码符合 RT-Thread 的编码规范，请在你的仓库中执行以下步骤运行代码格式化工作流（如果格式化CI运行失败）。
To ensure your code complies with RT-Thread's coding style, please run the code formatting workflow by following the steps below (If the formatting of CI fails to run).

🛠 操作步骤 | Steps

  1. 前往 Actions 页面 | Go to the Actions page
    点击进入工作流 → | Click to open workflow →

  2. 点击 Run workflow | Click Run workflow

  • 设置需排除的文件/目录（目录请以"/"结尾）
    Set files/directories to exclude (directories should end with "/")
  • 将目标分支设置为 \ Set the target branch to：sdio
  • 设置PR number为 \ Set the PR number to：11684
  1. 等待工作流完成 | Wait for the workflow to complete
    格式化后的代码将自动推送至你的分支。
    The formatted code will be automatically pushed to your branch.

完成后，提交将自动更新至 sdio 分支，关联的 Pull Request 也会同步更新。
Once completed, commits will be pushed to the sdio branch automatically, and the related Pull Request will be updated.

如有问题欢迎联系我们，再次感谢您的贡献！💐
If you have any questions, feel free to reach out. Thanks again for your contribution!

@github-actions

github-actions Bot commented Aug 4, 2026

Copy link
Copy Markdown

📌 Code Review Assignment

🏷️ Tag: components

Reviewers: @Maihuanyi

Changed Files (Click to expand)
  • components/drivers/include/drivers/dev_sdhci.h
  • components/drivers/sdio/dev_regulator.c
  • components/drivers/sdio/dev_sdhci.c
  • components/drivers/sdio/dev_sdio_dm.h
  • components/drivers/sdio/host/Kconfig
  • components/drivers/sdio/host/SConscript
  • components/drivers/sdio/host/sdhci-dwcmshc-platform.c
  • components/drivers/sdio/host/sdhci-dwcmshc-platform.h
  • components/drivers/sdio/host/sdhci-dwcmshc.c
  • components/drivers/sdio/host/sdhci-dwcmshc.h

📊 Current Review Status (Last Updated: 2026-08-04 20:56 CST)

📝 Review Instructions

  1. 维护者可以通过单击此处来刷新审查状态: 🔄 刷新状态
    Maintainers can refresh the review status by clicking here: 🔄 Refresh Status

  2. 确认审核通过后评论 LGTM/lgtm
    Comment LGTM/lgtm after confirming approval

  3. PR合并前需至少一位维护者确认
    PR must be confirmed by at least one maintainer before merging

ℹ️ 刷新CI状态操作需要具备仓库写入权限。
ℹ️ Refresh CI status operation requires repository Write permission.

@github-actions

github-actions Bot commented Aug 4, 2026

Copy link
Copy Markdown

MemBrowse Memory Report

No memory changes detected for:

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

No one assigned

Labels

component: drivers/sdio component: drivers Component

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

1 participant

@GuEe-GUI